WIGAM Optima plus

OPTIMA+ is the follow up of the new generation of A/C units for recovery, recycling, vacuum and charge for the maintenance and repair of vehicle air-conditioning systems. This model can work completely autonomously, thanks to the inclusion of the low and automatic high valves. The 3 independent scales with 1g resolution, managing oils and additives, allow to operate in a safe and reliable way on Hybrid and full Electric Vehicles. The high accuracy standard , together with the new objective of "ZERO" refrigerant leaks during the oil discharge phase, and the fully automatic management of the discharge of non-condensable gases, ensure that this model complies with the strictest standard dictated by the German car manufacturers.

• HYBRID-READY: AUTO-CLEAN function for hybrid and electric vehicles.

• Fully automatic unit:

   - Low and High automatic valves

   - Automatic Recovery /Recycling.

   - Automatic Vacuum / Vacuum test.

   - Automatic oil discharge (with scale).

   Automatic PAG, POE and UV oil charge.

   - Automatic refrigerant charge.

   - Automatic personalized cycle (recovery-vacuum-charge).

   - Flushing cycle.

• Zero refrigerant emission during the exhaust oil discharge phase.

• Maximum accuracy of the refrigerant quantity both in the charging phase (+/- 15g) and in the recovey phase, equal to 99% of the total quantity.

• Database upgradeable with USB memory.

• Standard printer. Customized paper report with workshop/ operator/vehicle data.

• Automatic alarm for service: the unit advises when you have to replace the filter and oil in the vacuum pump. (I.A.S.).

• Continuous monitoring of internal cylinder pressure.

• Automatic discharge control of not condensable gases.

• Periodic auto-test: the unit checks the internal circuit tightness every 20 days.

• Pressure test with refrigerant before the charging phase.

• Pressure test with nitrogen or AZOIDRO (N2+H2). • Distillation with automatic control.

• Integrated room temperature probe.

• Automatic temperature control of the refrigerant heater cylinder.

• Set up for interconnection through Wi-Fi kit (optional).

• Ready to integrate the new refrigerant analyzer Variant for R1234yf/R134a (optional) managed directly via the OPTIMA+ touch screen. • Ready to work with hermetic disposable dosimeters (optional).

• Upgradeable for use with the main replacement gases for R134a as R456A and R513A (contact Wigam for specific compatibility).