BrainBee AGS-688

2,495.00

1 in stock

1 in stock

SKU: Brain Bee Category:

Description

BRAINBEE AGS-688

This is the stand-alone gas analyser, ideal both for ordinary vehicle maintenance and repairs, and for official inspection tests. It encapsulates all the basic accessories and interfaces it needs to be autonomous in the management of exhaust gas tests.

OFFICIAL VEHICLE INSPECTION TESTS AND FOR BLUE QUALITY-GUARANTEE STICKER

In accordance with Decreto DM/628 and successive circulars, AGS-200 enables you to carry out the official test in the vehicle inspection procedure.

EASY TO USE

  • INTUITIVE KEYPAD
  • 6 LIQUID CRYSTAL DISPLAY UNITS
  • INCORPORATES A PRINTER
  • CONNECTABLE TO ANY PC, for operation using BRAIN BEE’s OMNIBUS800 software

THE PNEUMATIC GROUP

The innovative Condensate Separator Group is drop-forged in order to minimise gas travel and reduce maintenance times. Its design facilitates the continuous draining of the condensate water that forms in the separator. AUTOZERO and CALIBRATION with sample gas

INTEGRATABLE WITH BRAIN BEE ACCESSORIES AND INSTRUMENTS

Designed as a basic exhaust gas analyser, with its array of connectable optional accessories it can carry out other functions.

CERTIFICATION

– Conforms to ISO 3930/OIML class 0

– MID 2004/22/CE

– DM 628/96 and successive circulars

– AU 4 (Germany)

– MOT (UK)

– Austria

– PCT-Gosstandart of Russia (Russia)

– BRML (Romania)

– OMH (Hungary)

– Bulgaria

– Czech Republic

TECHNICAL SPECIFICATIONS

Measuring fields:

CO    from      0  to  9.99    %vol   Res. 0.01

CO2  from      0  to  19.9    %vol   Heat. 0.1

HChexane  from      0  to  19999  ppmvol   Heat.  1

02      from      0  to  25     %vol    Res.  0.01

No     from      0  to  5000   %vol  Res   1

Lambda    from      0.5 to  5  Res.   0.001

Revs (induction/capacitive)  from      300 to 19990   revs/min   Res. 10

Oil     from      20 to  150   ºC  Res.   1

Measuring chamber: AMB 2

Measuring Gas suction sensors 4 l/min. (6-m connection to gas probe)

Automatic and continuous condensate drainage

Semiautomatic tightness test with manual closure of the sampling probe

Automatic control of minimum flow

Automatic control of spent O2 sensor (up to 5mV and from 7mV)

Filters protecting cylinder-heads from water/gas from the pump placed externally in order to avoid having to open the device removing the seals

Automatic compensation of Ambient Pressure from 85,0 to 106,0 KPa

Calibration with sample gas bottle

Automatic autozero

Heating time to 20ºC: 10 minutes maximum

Response time CO, CO2 e HC < 15 sec.

CONNECTIONS

RPM acquisition via wire from induction clip or capacitive clip

Oil temperature input from PT100 probe (DIN43760)

Rpm/oil temperature reception via RS-232 wire, optional 433MHz radio

Serial connections: PC USB B (slave mode); PC RS-232 (9600,8,N,1); PC in RS-485 network (9600,8,N,1)

Software programming / update via RS-232 wire

Possibility to become operator interface towards opacimeter OPA-100

Integrated 24-column thermal printer

Typical 12 VDC power supply (11-15 VDC)

Consumption 1.5° DC (3A printing the test report)

Operating temperature from 5 to 40°C

Dimensions 434X190X291 mm

Weight 5Kg (estimated weight)

 Exhaust Gas Analyser

A Gas Analyser designed for today’s busy workshop.

With a quick warm up time, 6 back lighted LCD units, where test results are displayed, a built in printer, this is simply a must for any workshop.

The ideal tool for pre NCT checks.

..

..

 Click to download pdf

.

.Click to see AGS688 Demo Video w

 …    eeerrerrererreeeerrrreee

Additional information

Weight 0.00 kg
Dimensions 0.00 x 0.00 x 0.00 cm